Technical data

Technical data:

General Information:


The connections for the mains water and preheated water are made using a 1/2″ BSP male connector.
The connector can be joined to a 15 mm or 22 mm pipe using a reducing fitting.

Total installation depth: 40 mm
Total installation width: 800 or 900 mm
Total installation length: 800 to 2000 mm
Shower Tray Connections: 1/2″ BSP male. On request we can supply PressFit connectors.
Drain diameter: 60 mm
Weight: 20 kg
Maximum volume in the heat exchanger: 0.36 Litres

Heat Exchanger Material: Stainless Steel AISI 316L
Shower Flow Rate Range: 5 to 12.5 Liters/min
Maximum mains water pressure: 10 bar
Minimum mains water pressure: 1 bar
Maximum working temperature: 85 ºC


Please note that the provided information is specific to the WWHRS shower tray and its technical specifications. Ensure to follow the manufacturer’s guidelines and instructions for accurate and proper installation.

Shower Flow at 40ºC (Liters/min)Efficiency (%)Pressure Loss (∆P) bar
6380.28
8360.35

Scroll to Top